Cardboard Spool Ring for AMS (California Filament Remix)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple remix, with the changed parameters for the new cardboard California Filament spools to make them work in the AMS.
- Ocena
- 4,5 / 5
- Polubienia
- 20
- Pobrania
- 155
- Wydruki
- 1
- Wyświetlenia
- 1006
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Not a lot of changes from the original file, but just modified the parameters and generated the needed files for someone to print the model without installing Fusion 360. I was able to print in PLA without issues for this, but I think PETG may work fine as well. These are the changed parameters from the original file (Fusion 360 file can be found in the original model):
Cardboard Thickness: 3.2
Spool Diameter: 198.5
Fillet Radius: 0.6
Total Width: 12.25
Note: I made a slight change from my original model based on feedback, the width got reduced from 13 mm to 12.25 mm.