1 / 7
Sky-Watcher EQ6-R Pro Rear Altitude Adjustment Bolt Cap — zdjęcie 1
1 / 7

Sky-Watcher EQ6-R Pro Rear Altitude Adjustment Bolt Cap

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The rear elevation adjustment bolt on the Sky-Watcher EQ6R-Pro mount has a spring loaded handle that can be difficult…

Ocena
0 / 5
Polubienia
2
Pobrania
30
Wydruki
0
Wyświetlenia
523
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Gadgets
Licencja
Creative Commons — Attribution

The rear elevation adjustment bolt on the Sky-Watcher EQ6R-Pro mount has a spring loaded handle that can be difficult to use for fine adjustments while doing the polar-alignment (PA). It tends to slip and not grab all the time. While doing some maintenance on the mount, I decided to replace that handle with a small 12mm ratcheting wrench (link to wrench I used on Amazon: https://smile.amazon.com/gp/product/B08VS8BRB6). I designed this cap to slip over the 12mm end of the adjustment bolt. It has a hole in the center for a M5 screw that will tighten it down using the preexisting threads in the bolt.

Print Settings

Printer Brand:

Robo 3D

Printer:

R1 PLA Model

Rafts:

No

Supports:

No

Resolution:

200

Infill:

100%

Filament: Amazon Basics PLA Black

Category: Gadgets

Tagi