Editable hooks for 38mm Magnusson pegboard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Various hooks for Magnusson pegboards. Editable by a spreadsheet in FreeCAD.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 184
- Wydruki
- 1
- Wyświetlenia
- 708
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
A set of various hooks for pegboards with 10 mm square holes spaced by 38mm, branded as Magnusson, Wolfcraft and other. As usual with my models, I made them editable by a spreadsheet in FreeCAD = you don't need paid software to edit them + you don't have to manually change dimensions on sketches. Bigger one can hold two 300g hammers so they're quite durable. Screwdriver holder is a hook to which a piece of plank with holes for screwdrivers can be mounted - I used an old floor panel. This way you get the part faster and use less filament.
My printer settings:
Material : Plast-Spaw PLA 1,75 mm
Nozzle: 0.4 mm
Temp: 210*C
Bed temp: 20*C, I don't have a heated bed on my printer
Layer: 0.3 mm
Wall thickness: ½ of hook thickness, 1 mm by default.
Infill: Doesn't matter - use thicker walls instead
Speed: 50 mm/s
Small hook prints in about 10 minutes