Nerf 37 Shot Absolver Shell for 4" PVC Pipe - Updated
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Edit: Updated the files with a new looser 13mm barrel fit that will still fit inside 4" pipe. The files included are…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 203
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Edit: Updated the files with a new looser 13mm barrel fit that will still fit inside 4" pipe. The files included are outlined below.
- 37shot_13mm_shell_insert.stl - The base file. Just the barrels and meant to be used to make your own complete shell by mounting the insert in a piece of pipe or tubing of choice.
- 37shot_13mm_shell_insert.step - Same as above but in step for easy modification.
- 37shot_13mm_shell_capped - Same as the insert, but with a 10mm 102mm wide base. This will be a snug fit in 4" PVC(102mm vs 102.26mm). I do not recommend using this on its own, I recommend still using this to make your own complete shells with pipe, but the base will make centering it easier.
- 37shot_13mm_shell_capped.step - Same as above except in step for easy modification
Basic absolver design meant to fit snugly inside 4" PVC pipe and shoot 37 darts at once. Individual barrels have a .490" inner diameter vs .485" for CPVC. If you intend to use this, you will need something at least as powerful as a Titan or a drain blaster. This has not been tested yet.
Print Settings
Rafts:
Doesn't Matter
Supports:
No
Infill:
at least 10%
Category: Toys & Games