1 / 1
lisle oil funnel holder with drip collector (UPDATED V5) — zdjęcie 1

lisle oil funnel holder with drip collector (UPDATED V5)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

i created a holder for my lisle oil funnel #19912 and #19612. has a sports drink cap on the bottom so you can attach a…

Ocena
5 / 5
Polubienia
18
Pobrania
100
Wydruki
2
Wyświetlenia
854
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial

i created a holder for my lisle oil funnel #19912 and #19612. has a sports drink cap on the bottom so you can attach a bottle to collect residual oil. i added a bit of RTV to the rim of the bottle after noticing a little bit of a leak seams to be good now. has 3 5mm mounting holes i used 3/16 rivets for my application. i used pla for mine witch seams to be holding up ok but you may want to use something more chemical resistant. USE V5 FOR MOST UP TO DATE VERSION. improved strength and durability.  

Print Settings

Printer Brand:

Creality

Printer: 

Ender 3 Pro

Supports:

Yes

Resolution: 

standard

Infill:

70

Filament:

generic pla +

black


 

Notes:

 

need to print on the face that mounts to the wall with supports under the cap. supports were a bit of a pain to remove from the cap i found it easiest to drill a hole in the middle the brake them free with some needle nose

 

 

Category: Tool Holders & Boxes

Tagi