1 / 21

Vacuum hose adapters for all common sizes

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Max

@Ostat

Hose adapters 1, 1.25, 1+3/8, 1+7/16, 1.5, 1+7/8 2, 2.5, 3, 3.5, 4, 4.5, 5, 32,35, 38, 40, 50 60, 100, 120, 125, 150

Ocena: 4,905 / 5
Polubienia: 7585
Pobrania: 21 740
Wydruki: 61
Wyświetlenia: 77 973
Oceny: 63

Aktualizacja u źródła: 11 lut 2023

Informacje o modelu

Źródło: Printables
Kategoria: Tools
Licencja: Creative Commons — Attribution — Noncommercial

Szczegóły Pliki (707)Wydruki i komentarze (Wydruki: 61) (Komentarze: 139)Remiksy (4)Kolekcje (10 865)

Hose adapters for all common (at least what I could find online) hose sizes.

All adapters have:

Each size has an option of Outer Diameter measurement or Inner Diameter.
- Outer Diameter (OD): Intended for the printed tube to go inside your existing hose.
- Inner Diameter (ID): Intended for the printed tube to go over your existing hose or nozzle.
40mm long connector at each end
3mm taper on each connector, from -1.5 to +1.5
Wall thickness of 2mm
A hose stop on the large end

These were all generated with this OpenSCAD Parametric model. If any of these don't suit you can customise your own, or let me know and I can generate it.

Related models
Hose Fittings collection
Parametric model (used to generate all the below models)

edit 2023-02-11

Added sizes, 4.5", 5", 120mm, 125mm, 150mm

edit 2023-02-02

Added Internal Diameter (ID) connections. Previously I only supported Outer Diameter (OD) only. Now there is ID-ID, ID-OD, OD-OD.
Removed redundant sizes where the Metric and Imperial sizes are very close. I.E. 1.25in is 31.75mm, so 32mm is not needed.
Included connectors for connections two of the same size hose together.

edit 2022-12-06

Added hose size 1 7/8in

Tagi

vacuum vacuumadapter vacuumhose