Tournament Fishing Board Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a tournament fishing board holder to aid in the measuring and taking pictures of the fish for kayaks with…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 532
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
This is a tournament fishing board holder to aid in the measuring and taking pictures of the fish for kayaks with track systems. It uses 3/4" 1/4-20 button head screws from Lowes or Home Depot and YakAttack 1/4-20 track nuts (https://www.yakattack.us/TN_1420_6_p/tn-1420-6.htm). Should fit any track system that can use YakAttack nuts. Helps to keep the board at a 90 degree position to cradle the fish making it easier to have two hands to take the picture and pinch the tail. Align print so it is printed with the circle as the base touching the build plate. No supports needed and it prints great.
Print Settings
Printer:
Voron V0.1
Rafts:
No
Supports:
No
Resolution:
.20
Infill:
25%
Filament:
Hatchbox PLA
Black
Notes:
If you want the base to be a little more sturdy you can add a support blocker with infill density and scale to 100% or whatever you want for added strength. 3 Walls and I use a brim to keep it planted.
Category: Sport & Outdoors