IKEA-style over door hook w/threads and screws
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I modelled the hangers to include some M6 threads and I also made some printable M6x30 screws. There are three hangers…
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 89
- Wydruki
- 2
- Wyświetlenia
- 828
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution
I modelled the hangers to include some M6 threads and I also made some printable M6x30 screws. There are three hangers with different tolerances for the screw/thread gaps. I also included the Fusion 360 file for further customization. If you want to modify the thread tolerances, go to Solid->Modify->Change Parameters and adjust the "threadOffset" to your desire value.
There was also a bit of chamfer and filet done to the face of the hanger to soften the hard edge.
Many thanks to dkozhemiakin for the original design!
Print Settings
Printer:
TRONXY X5SA PRO
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
20% cubic
Filament:
Stronghero PETG
White
Notes:
Printed all with five perimeters, top, and bottom layers. Hotend 250c, bed 75c, 36mm/sec base speed.
**NOTE:**Print the screws with the bolt head face down. not as presented in the file. I also used a 5mm brim for adhesion.
Category: Bathroom