Modular Aquaponics Tower Cone Base
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This design is a remix of the original collector cone piece from the Modular Hydroponic Tower Garden by…
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 638
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This design is a remix of the original collector cone piece from the Modular Hydroponic Tower Garden by boundarycondition. It allows the tower to be separate from the rest of the system. It uses M5 bolts to attach it to a base.
Print Settings
Printer:
TRONXY X5SA PRO
Rafts:
No
Supports:
Yes
Resolution:
0.2mm
Infill:
15% gyroid
Filament:
Color Matrix PET
Black
Notes:
The model will have problems printing out the outlet port without knocking it off the build plate. I've included the supported model that printed well for me.
edit-The supported model didn't seem to have saved as I intended. I will try to fix that.
Remember to use food-safe plastic if you are growing edible plants. I initially wanted to print in PETG but after much searching, affordable certified food-safe PETG does not seem to be easy to find. I ended up going with PET which I found is not much different to print IMO.
Fair warning: At 60mm/sec and relatively fast accelerations, the print took over 24 hours.
Category: Outdoor & Garden