X5SA PRO Bondtech, V6, and BLTouch Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Somehow this model got double-posted. Please see the following thing for the most current version:…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 370
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Somehow this model got double-posted. Please see the following thing for the most current version:
Print Settings
Printer Brand:
Anet
Printer:
A8
Rafts:
No
Supports:
Yes
Resolution:
Adaptive; 0.1-0.3mm
Infill:
15% gyroid
Filament: Smartbuy ABS Red
Notes:
240c hotend, 110c bed, seven perimeters, four top and bottom layers, 25mm/sec speed throughout.
So far testing of the design has completed tolerance and clearance tests and now is mounted as shown in the pictures. Battle testing has not been done yet.
How I Designed This
Hi-resolution gallery
Hardware BOM
Many M3 washers
Rear Plate:
M3 Hex nuts (x6)
M3x8 screws (x6)
Motor to extruder:
M3x40 (x3)
Front housing to Rear Plate:
M3x10 (x6)
X-axis switch mount:
M3x6 to M3x10 (x1)
4020 Extruder fan to housing:
M3x16 (x4)
4010 Part cooling fan to housing:
M2x12 (x2)
Category: 3D Printer Parts