Arduino-Driven Automatic Fish Feeder Servo Spacer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I had a problem getting the servo to sit correctly; I think I must be using a servo with different dimensions than the…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 210
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Share Alike
I had a problem getting the servo to sit correctly; I think I must be using a servo with different dimensions than the one that the design was based around.
The spacer slides in the notch at the bottom of the electronics enclosure. Insert with the indicator arrow facing up and pointing in the direction of insertion. Edges are chamfered so it matters slightly.
Picture of servo used has been included for reference.
Print Settings
Printer Brand:
Anet
Printer:
A8
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
N/A
Filament: Stronghero PETG Black How I Designed This ===================
Category: Pets