Arduino-Driven Automatic Fish Feeder Auger with servo mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The original auger looked challenging to mount accurately onto the servo as presented, plus it was non-manifold. It…
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 263
- Wydruki
- 0
- Wyświetlenia
- 1848
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution
The original auger looked challenging to mount accurately onto the servo as presented, plus it was non-manifold. It also looks to be quite a workout for an FDM printer, although I didn't try.
This model fixes the holes and adds a mount for the servo.
As I printed this with the Voxelab Proxima MSLA I ended up with a working supported model in the end. That has been uploaded as well.
Print Settings
Printer:
Proxima
Rafts:
Yes
Supports:
Yes
Resolution:
0.05mm layer height
Infill:
solid
Filament:
Anycubic Basic Resin
Grey How I Designed This ===================
Category: Pets