1 / 3
X Belt holder Anet A8/i3 for GT2 Belt 1.3-1.4mm (Simplify3D friendly)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simplify3D wasn't able to slice the original correctly so I ran it through Meshmixer and it seemed to fix things. I…
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 219
- Wydruki
- 2
- Wyświetlenia
- 843
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 2) (Komentarze: 2)Remiksy (0)Kolekcje (17)Powiązane
Simplify3D wasn't able to slice the original correctly so I ran it through Meshmixer and it seemed to fix things.
I noticed the gaps at the tops of the loop sections were supposed to be thin walls but it turns out the openings really help in getting the belts on and off. They give you a little wiggle room and somewhere to pry on the belts. Great original design.
Category: 3D Printer Parts