Case for Apple TV Siri Remote (2nd gen)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my attempt to never lose another Apple TV remote. This case is specifically for the Apple TV Siri Remote (2nd…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 385
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
This is my attempt to never lose another Apple TV remote. This case is specifically for the Apple TV Siri Remote (2nd gen).
- Designed to be printed withTPU filament
- Designed to beprinted upright withno raft or supports
There are 3 designs included:
- case with airtag -- this is the one I'm using. It has a pocket on the back for an AirTag.
- case with lanyard -- a simpler approach is to attach a lanyard to help prevent losing the remote to the guts of your couch.
- case -- if you just want protection for your remote.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.20
Infill:
50%
Filament: Prilene TPU Black
Notes:
You may need a raft or brim depending on how well your first layer or two adhere. If you look at my photos, one of them I printed with a raft and the other I did not. Both turned out great, except the one with the raft was noticably rougher on the bottom after I removed it.
Also, I doubt that using a stiffer filament (like PLA or PETG) would work for this model, since it is designed with very tight tolerances, expecting the flexible nature of TPU to allow for that. But I'd be curious if anyone tries and has success with a stiffer filament.Category: Gadgets