BMW E90 Cup Holder Bottom
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the bottom of the cupholder found within the BMW E90 (E9X). Not the whole cupholder mind you, just the bottom.
- Ocena
- 5 / 5
- Polubienia
- 38
- Pobrania
- 136
- Wydruki
- 0
- Wyświetlenia
- 3630
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Right here is the bottom of the cup holder found within the BMW E90 (E9X). I spent well over 8 hours working on this so I would appreciate if you don't use my work for commercial uses. I made about 12 copies of this part before I was happy with it. This is also my second part in Fusion360 but really my first part that I spent a lot of time and effort into. But feel free to use this in your car, I hope you can enjoy the amount of work I have put into this. I have some print settings down below for PETG if you're interested.
Filament: PETG (Overture)
Color: Black (Matte is best)
Infill: 35%
Extruder Temperature: 240 Degrees Celsius
Bed Temperature: 85 degrees Celsius
Supports: Yes
Support Placement: Touching Build-plate (Highly recommended)