Z motor mount for CTC I3 Pro B
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Improved mount for the Z axis motors on my CTC I3 printer. You can use a M8 rod to connect these mounts with the M10…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 201
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Improved mount for the Z axis motors on my CTC I3 printer. You can use a M8 rod to connect these mounts with the M10 Y-Axis rods. The Motormount STL file is for both left and right motors.
Use M10 Nuts and big washers to get a really strong connection.
Print Settings
Printer:
CTC I3
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
30%
Notes:
I did not used a brim
Place the side with the "Z" downPost-Printing
Nuts
Add the M3 nuts with the help of a soldering iron. The hex shaped space for the nuts are too small for normal placement of the nuts. This method ensures that the nuts have a strong connection and they don't fall out when assembling it.
Category: 3D Printer Parts