Bambulab spool winder for drill V2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I have a lot of wide spools that do not fit in the bambulab AMS. After printen a spool you have to rewind it.
- Ocena
- 4 / 5
- Polubienia
- 107
- Pobrania
- 692
- Wydruki
- 4
- Wyświetlenia
- 6054
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Public Domain
Wide spools do not fit in the AMS from Bambulab. I printed spoolholders updated by Joshua Smith https://www.printables.com/model/251457-bambu-lab-reusable-spool-holder-hex-remix but after rewinding one by hand I designed the drill attachment so I could do it faster.
changed the model so it will also fit
https://www.printables.com/model/272767-bambu-lab-reusable-spool-remix-four
model from MediaMan3D
I used a allan key socket to fit in the drill and the back to fit in the grip.
this winder is only tested with above mentioned spoolholder.
Material and print quality is not relevant. Can be printen without support.
Because not everyone has the right socket i made a new version that holds a m8 bolt. I inculded the Freecad drawing so if you need another size feel free to edit it.