Raspberry Pi Squeezebox case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case for Raspberry Pi PiCorePlayer Squeezebox and display.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 1606
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution
Case designed to fit a Raspberry Pi, touch screen display and speakers.
This is the display I have used https://www.amazon.co.uk/gp/product/B07KJBCNS8/
The speakers - https://shop.pimoroni.com/products/mini-speaker-4-3w
Speaker Bonnet - https://www.adafruit.com/product/3346
For the touch buttons - https://www.adafruit.com/product/1374 and https://www.adafruit.com/product/1362
All items printed at 0.16mm layer height with a 0.4mm nozzle. Supports are only required for the M3 holes in the 2 side panels.
The M3 holes in the 2 side panels are 2.7mm to allow for the bolts to tap a thread except for the ones to attach the front which are M3 clearance holes.
All sides need to be printed with the outside face against the print bed. The back can be printed either way.
Holes for bolts are M3 except for the 5 touch buttons which are M4.
4 x M3 nuts are required to sit inside the latches to hold the display in place.