1 / 9
Black PSU Mount / PSU Holder - for Prusa MK3S/MK3S+/MK4
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
PSU holder for mounting your PSU outside of an enclosure
- Ocena
- 4,5 / 5
- Polubienia
- 30
- Pobrania
- 128
- Wydruki
- 2
- Wyświetlenia
- 1304
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 2) (Komentarze: 4)Remiksy (1)Kolekcje (56)Powiązane
With this PSU Mount I'm using the fact that the PSU circuit board is screwed to the PSU case, but the screws don't use the full length of the screw thread. This allows us to use the remaining space in the thread to securely mount the PSU.
Printed with Extrudr GreenTEC Pro and 0.2mm layer height.
Dimensions
Width: 112mm
Depth: 51mm
Height: 133mm
6mm bottom base height
3mm wall thickness
Assembly - non-printed parts
- 3x No. 6-32 UNC x 1/4 inch screws (same as used for HDDs, 5-7mm length sould be ok, M3 screws won't work!)
- 1x M4 x 6-12mm
- 4x screws for mounting the holder to the baseplate. The screw hole has a diameter of 4mm and a length of 3mm. 8mm diameter and 3mm length for the screw head hole. The height of the screw head should not exceed 3mm, otherwise you can't use the original Prusa PSU cover anymore.
License
This work is licensed under CC BY-SA 4.0.