Simple Lock for Sliding Door
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a small lock for sliding doors
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 142
- Wydruki
- 4
- Wyświetlenia
- 757
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution
We have a sliding door with a broken lock. Also we have a cat with escapist abilities hence we required a lock on the door, and while we get a definitive lock for the sliding door, I came up with this simple lock that only requires double side tape to put it in place.
It Is designed to “self lock” when closed the door. On my sliding door, there is a gap of 7mm between the door and the frame that I have to take into account, so they not align perfect if you see them in the printer bed.
Please note that the 3D model looks like one piece, but that's because I designed it to be sure it all bodies fit together well. But if you see the preview print, there are 4 bodies in their recommended print orientation, which won't require supports.
I printed this on my Ender 3 V2 with this settings:
Layer Height: 0.3
Layer width: 0.4
Material: Red PLA
Temp: 210C
Supports: No. (please check cura preview image with recommended orientation)