Fume extractor for soldering
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my remake of several designs I found in Thingiverse.
- Ocena
- 5 / 5
- Polubienia
- 36
- Pobrania
- 152
- Wydruki
- 1
- Wyświetlenia
- 1994
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is my remake of several designs I found in Thingiverse.
I put holes in the body of the main part to get a power plug in and a switch. the holes are 12 mm.
Further things I done: put a protection on the backside of the fan and put a protection in the front, that the filter can not fall out of the bady during transportation.
The design in compact and therefore easy to store.
The original files from Thingiverse you can find here:
Solder Fume Extractor by RShaman: https://www.thingiverse.com/thing:3000022
and
Honeycomb Fan Grilles, 40, 50, 60 & 80mm by freemark:
https://www.thingiverse.com/thing:1879694
Print instructions
Print with PLA