Skadis Dovetail Peg System
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A set of dovetail pegs to interface with bigger models. Allows for objects to be printed with in best orientation .
- Ocena
- 0 / 5
- Polubienia
- 84
- Pobrania
- 616
- Wydruki
- 0
- Wyświetlenia
- 2457
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
This is a set of dovetail pegs that can be used to mount other models to the IKEA Skadis pegboard system. Utilizing this system bypasses the awkward nature of Skadis pegs and allows both the pegs and the parent part to be printed in the best orientation and to minimize support material used.
To uses this system in your model create a dovetail slot that is 4mm deep, 8mm wide on the narrow side and 11mm wide on the long side (please see the picture for a drawing). The dovetail pegs are slightly smaller and will friction fit. Each row of Skadis openings is 40mm on center apart if you want your model to have multiple rows of pegs.
For examples of this system in use please see a few of my other models which utilize this system.
Skadis headphone holder: https://www.printables.com/model/281287-headphone-holder-for-skadis-dovetail-system/files
Skadis Xbox Controller holder: https://www.printables.com/model/281300-xbox-controller-holder-for-skadis-also-steam-contr