Elegoo Neptune 3 Creality Dual Z axis support bearing mounting blocks
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adding Dual Z axis to your Neptune requires a few parts. Here's my contribution to the cause :)
- Ocena
- 5 / 5
- Polubienia
- 39
- Pobrania
- 250
- Wydruki
- 1
- Wyświetlenia
- 2832
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This part allows the use of the Z axis screw supports that come with the Creality Ender 3 dual Z screw kit on your Elegoo Neptune 3 or similar, with smooth faced extrusions.
Link to kit - https://amzn.to/3Cd28hc
You need 400mm screws for the supports to work properly - https://amzn.to/3BR9zte
You'll also need m5x45mm socket head screws to affix the top rail to the Z rails - https://amzn.to/3dYd2xU
Standard M3 and M4 T nuts will work fine. This is a replica of the 2020 extrusion profile.
Please note: Z axis travel will be limited to 270mm instead of 280 with the bearing supports If you need the full Z height, you can remove them with no issues. I just put them on because I had them :)
Don't forget the PSU adapter! Elegoo Neptune 3 Creality PSU bracket adapter by Feral Engineer | Download free STL model | Printables.com
I designed these parts myself, so please, tip your maker :)