Minecraft Steve with articulated arms, legs and head
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I recently printed a similar design to this, but it was a single print design.
- Ocena
- 4,75 / 5
- Polubienia
- 152
- Pobrania
- 2188
- Wydruki
- 11
- Wyświetlenia
- 7849
- Oceny
- 12
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution
I recently printed a similar design to this, but it was a single print design. But all of the joints failed when printing, as they were printing in mid air within the model.
So i designed this from the ground up. After some post printing, the parts are pushed together and with a click, they are in place.
NOTE
Supports are needed for the body section and are not needed elsewhere in the print. Some slicers will add some support for the nose. This is not needed and if your slicer has the "Support Blocker" function, this can be used on the nose area.
FILES
In the files, i have included a full print stl (all parts in one print), or if you wish, you can print one part at a time. Both the LH and RH arms and legs are identical, so print two of each.
Print instructions
Supports are needed for the body section and are not needed elsewhere in the print. Some slicers will add some support for the nose. This is not needed and if your slicer has the "Support Blocker" function, this can be used on the nose area.