Basic Board + PSU Add-on Printable Parts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
All the official printable parts for your Basic Board + PSU Add-on.
- Ocena
- 4,877 / 5
- Polubienia
- 417
- Pobrania
- 12 638
- Wydruki
- 176
- Wyświetlenia
- 27 044
- Oceny
- 138
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- GNU General Public License v3.0
All printable parts for your Basic Board + PSU Add-on.
Basic Board + PSU Add-on is needed only if you have Advanced Filtration System or/and White LED Strip Add-ons
You have the option to print two different holders for two different power supplies, depending on which one you received, please refer to the instructions to select the correct power supply holder
The guide for Basic Board + PSU Add-on is part of the guide for Advanced Filtration System or White LED Strip Add-ons
All of the add-ons and community models can be found here.
Print instructions
You have two options:
- use the pre-sliced G-code and print it on your MK3S+
- download the latest PrusaSlicer and use the following settings**:
- print settings: 0.30mm DRAFT
- filament: PETG (tested on Prusament)
- 15% grid infill
** Note that print settings are recommended, but you can experiment with your own.