Detective Pikachu Lithophane
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Custom lithophane stand included. I'll post pics when I get around to printing this one.
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 162
- Wydruki
- 0
- Wyświetlenia
- 2263
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Custom lithophane stand included.
I'll post pics when I get around to printing this one.
Software used:
Photoshop, Blender, Maya, Meshmixer and S3D.
Dimensions: 171mm x 99mm x 6mm.
Print settings and information:
https://www.gadunky.com/litho-print-settings/
Note: This is a large and detailed stl file and may put some systems/slicers under pressure. It slices best in Slic3rPE, Cura 3.6+ or S3D.
A note on slicing in Simplify3D:
It’s easiest to slice the lithophane in Cura(or Slic3rPE) as there’s an extra step in Simplify3D due to the way the lithophanes are created(this by design to allow additional editing/printing options for more advanced users).
If you want to use Simplify3D you just need to do the following:
Load the lithophane STL into S3D as normal.
Click Mesh–Separate Connect Surfaces
Slice as normal
The added bonus of doing this is you can re-crop the image into the frame if you wish, or easily resize or remove the frame altogether. Using this method you can also print the frame in one colour/material and the lithophane in another if your printer has that option.
If you don’t do the above in S3D there may be a tiny gap between the frame and the lithophane when you actually slice the model.
Check out more on my site: https://www.gadunky.com/
Print instructions
Print @ 0.1mm or 0.12mm layer height. 6 walls/shells and 100% infill.
Recommended material: Colorfabb Standard White PLA.
More info @ https://www.gadunky.com/litho-print-settings/