1 / 5
3d printed / EDF 132mm / Electric Ducted Fan / RC /
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
132mm EDF with 3060 4s Brushless motor. Gt2 Pulley needed.
- Ocena
- 0 / 5
- Polubienia
- 87
- Pobrania
- 1537
- Wydruki
- 3
- Wyświetlenia
- 7328
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 3) (Komentarze: 9)Remiksy (0)Kolekcje (105)Powiązane
You can use a 3660 4s Brushless motor. The connection betwen the prop and the motor is a Gt2 Pulley with pressfit. You should print the whole Thing in 0.2mm and a fibre reinforced Material. The Flow corrector gets glued to the back of the motor.
Its on you, using the duct without strator blades. The one with gives you a hughe thrust improvement.