1 / 9
SK-Cube 7035 Blower fan via CPAP tube part cooling mod for Breezer Hotend
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
SK-Cube 7035 Blower fan via CPAP tube part cooling mod for Breezer Hotend used GDSTIME 7035 blower fan
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 807
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 7)Remiksy (0)Kolekcje (14)Powiązane
SK-Cube 7035 Blower fan via CPAP tube part cooling mod for Breezer Hotend
used GDSTIME 7035 blower fan
Breezer Hotend https://sites.google.com/view/seckit-wiki/Breezer
and M4 screws + Nuts (2x34mm 4x12mm, 8 Nuts)
Can be installed to take from inside or outside depending on need/filament
Additonal Fan holder to put into door to allow cooler chamber for PLA
Printed in ABS
0.2 mm Layer height
0.4 Nozzle
if oriented correctly no support should be needed.