Bracket for hidden Apple Airtag on Segway Ninebot Kickscooter MAX G30D II

I made this bracket is to be mounted on the steering column on my Segway Ninebot Kickscooter MAX G30D II

(Please note that im on a beginner level, when it comes to designing parts in fusion 360)

Its a tight fit around the steering colom, 

The front pocket for the Apple AirTag is made a bit to large, if the AirTag is loose then use some superglue or something else too keep it in place inside.

Instruction:

I have uploaded the Gcode file with the settings I used, and the step (stp) files if you want to slice the parts yourself

Prusa Slicer settings:

• Use a 3 mm brim for the pins, and locking pins
• I used 3 perimeter on all partrs

• In Prusa Slicer, Rotate the left and right parts, so that hat the 2 slots for the locking pins are facing up

• In Prusa Slicer, Rotate the The 4 pins,  so that the ends are facing down

After print of all parts:

• Insert the 4 pins in the “Right Part” front pocket
• Insert the Apple Airtag in the front pocket 
• Mount the front lid and press alle parts together
• Mount the right part on the steering colom and the place the left part 
• The 2 parts has to be oriented with the locking pins slots facing down
• Press both parts together, (its a tight fit)
• Push the 2 locking pins into the slots, one by one
• Use super glue if needed
• i made a tap on the ends of the locking pins, this is for easier removal of the 2 locking pins. (the 2 taps can be cut of if you want to)