Linear Rail Adapter (MGN12H) for Micro Swiss Direct Drive for Ender 5 using Stock Belts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a printed adapter to mount the Micro Swiss Direct Drive for Ender 5 on a MGN12H carriage using the stock belts
- Ocena
- 0 / 5
- Polubienia
- 26
- Pobrania
- 243
- Wydruki
- 0
- Wyświetlenia
- 1670
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is a printed adapter to mount the Micro Swiss Direct Drive Extruder for Ender 5 on a MGN12h linear rail carriage that utilizes the stock belts
If you are looking for an adapter using CoreXY belt config, check here:
- https://www.printables.com/model/286051-linear-rail-adapter-mgn12h-for-micro-swiss-direct-
The Micro Swiss Direct Drive Extruder for Ender 5 can be used on a Ender 5, Ender 5 Pro or Ender 5 Plus
Recommended Print Settings:
- Use a stronger material: ABS, ASA, PC, PCCF (no Nylon)
- First layer height 0.25mm
- Layer height: 0.2mm
- Extrusion width: 0.4mm, forced
- Infill percentage: 40%
- Infill type: Adaptive Cubic, grid, gyroid, honeycomb, triangle, or cubic
- Wall count: 4
- Solid top/bottom layers: 5
- Supports: NONE
Screws you will need:
- (4) M3x8 socket head screws to attach the adapter to MGN12H carriage
- (2) M5x10 screws and (2) M5 washers to attach the adapter to the extruder plate ( top holes )
- (1) M5x18 screw, (1) M5 washer and (1) M5 Nyloc nut to attach the adapter to the extruder plate (bottom hole)
Many thanks to Print2Win for providing the assembly of the MSDD that enabled this adapter to be created
Step and STL files added