FRSKY Taranis Q X7, FPV LCD monitor folding mount V1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a folding mount for the FRSKY Taranis Q X7 or QX7 S. This will allow you to mount a LCD monitor that has a…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 570
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a folding mount for the FRSKY Taranis Q X7 or QX7 S. This will allow you to mount a LCD monitor that has a screw mount on the bottom of the monitor. Included screw size is the standard 1/4"-20 that fits most tripod mount LCD monitors. You could also use it to mount a large antenna, such as a Yagi or Helical.
Nuts and bolts/mounting hardware Top piece Back piece Also includes a hinge with 3 different mounting holes so that you can fit different sized LCD monitors. Some assembly required.
Here is a folding mount I made to fit a FPV monitor on a Taranis Q X7.
This is designed to be printed at 100% size in PLA. When designing I already took into account shrinkage for PLA of about 1%. So, just print at 40-50% infill and it should fit. If using ABS, you might add 2-3% size.
DO NOT FORCE IT OVER THE LANYARD HOOK! It should fit loosely over that. Some minor Dremeling may be required on the lanyard hole. If you push too hard on the hook, it can damage the internal circuitry of the radio!
Hardware:
(2) 20mm long bolts, can be 3mm (M3) round to however large you want your hinge by drilling out the hole larger. https://www.amazon.com/uxcell-M3x20mm-Stainless-Phillips-Machine/dp/B01LK6XIBU/ref=as_li_ss_tl?ie=UTF8&qid=1485932811&sr=8-1&keywords=M3+x+20+stainless&linkCode=sl1&tag=kiloohm-20&linkId=5f13e8c0d11441ba2449d902914d9821
(2) Lock nuts, M3 https://www.amazon.com/uxcell-M3x20mm-Stainless-Phillips-Machine/dp/B01LK6XIBU/ref=as_li_ss_tl?ie=UTF8&qid=1485932811&sr=8-1&keywords=M3+x+20+stainless&linkCode=sl1&tag=kiloohm-20&linkId=5f13e8c0d11441ba2449d902914d9821
(4) Washers, M3 https://www.amazon.com/uxcell-M3x20mm-Stainless-Phillips-Machine/dp/B01LK6XIBU/ref=as_li_ss_tl?ie=UTF8&qid=1485932811&sr=8-1&keywords=M3+x+20+stainless&linkCode=sl1&tag=kiloohm-20&linkId=5f13e8c0d11441ba2449d902914d9821
(1) 1/4"-20 bolt, about 1/2" long to mount the monitor https://www.amazon.com/uxcell-M3x20mm-Stainless-Phillips-Machine/dp/B01LK6XIBU/ref=as_li_ss_tl?ie=UTF8&qid=1485932811&sr=8-1&keywords=M3+x+20+stainless&linkCode=sl1&tag=kiloohm-20&linkId=5f13e8c0d11441ba2449d902914d9821
(3 or 4) 20mm long by 2 or 3mm wood screw the back on and the lanyard hook bolt. https://www.amazon.com/uxcell-M3x20mm-Stainless-Phillips-Machine/dp/B01LK6XIBU/ref=as_li_ss_tl?ie=UTF8&qid=1485932811&sr=8-1&keywords=M3+x+20+stainless&linkCode=sl1&tag=kiloohm-20&linkId=5f13e8c0d11441ba2449d902914d9821
There are two hinges included with varying hole standoffs to accommodate multiple sized monitors: In the pictures above, that is the double. The holes are 16mm apart on center. The monitor is a Skyzone 702 or Foxtech d702, with the sunshade installed and using the double hinge, it doesn't touch the sticks when folded.
I will print this for you! I have this for sale on eBay, same title as above. But it's a version 2 which is a bit more sturdy and refined and includes nuts and bolts.
Print Settings
Rafts:
No
Supports:
No
Resolution:
.2mm
Infill:
40 or 50
Filament: aio robotics PETG
Black How I Designed This ===================
Inventor 2016
Category: R/C Vehicles