1 / 6
Support "UFO"-Ring for fiberglass poles / portable antenna tower
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Support Ring for Amateur-Radio antenna poles. Our working title was "UFO-Dish". It's purpose is to fix and stabilize…
- Ocena
- 0 / 5
- Polubienia
- 30
- Pobrania
- 161
- Wydruki
- 0
- Wyświetlenia
- 755
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (63)Powiązane
Support Ring for Amateur-Radio antenna poles. Our working title was "UFO-Dish". It's purpose is to fix and stabilize the fiberglass tower during use.
We tested serveral copys and use them during fieldday-events.
There're versions with different center-hole sizes:
- version for 10mtr. DX-Wire tower
- 22,5 mm hole - universal design
- 46 mm hole - universal design
For maximum strength print it with 100% infill. Use at least 3 bracing cables for strapping down the tower.
Category: Electronics