1 / 1
Belt-Saver for Belt-Tensioners with M3 screw and T2.5 belt
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tiny but helpful thing which distributes the tension (which is caused by the tension screw) on the whole cross…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 96
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Tiny but helpful thing which distributes the tension (which is caused by the tension screw) on the whole cross sectional area of the belt.
So the belt is not only strained on the very little spot where the screw is placed.
Category: 3D Printer Accessories