1 / 3
Ender 3 + Direct Drive "Bullseye" Fan Duct — zdjęcie 1
1 / 3

Ender 3 + Direct Drive "Bullseye" Fan Duct

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I wanted to use the excellent bullseye fan duct on my Ender 3 but I've changed mine to direct drive with the genuine…

Ocena
5 / 5
Polubienia
42
Pobrania
682
Wydruki
2
Wyświetlenia
6679
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

I wanted to use the excellent bullseye fan duct on my Ender 3 but I've changed mine to direct drive with the genuine Creality kit. Anyone who's tried this will find the feed motor is in the way for the cooling fan.

I have remixed the bullseye duct to angle the fan 15degrees - it's a tight fit but works perfectly.

I take no credit for the duct and I can't guarantee the airflow is as good although I have smoothed out the path of the air from the fan so it should be just as good as the original.

This design uses the stock part cooling fan and the Bullseye mount that you can find here:

https://www.thingiverse.com/thing:2759439

This is my first ever 3D model and I'm really happy with it!

You might have to lightly sand the gaps for the fan to slot into as it's quite tight.

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

Rafts:

No

Supports:

No

Resolution:

.16

Infill:

60%

Filament: Any PETG (although I used PLA and it hasn't melted as long as the fan is running th rough the print) User Choice


Notes:

Supports from build plate only. (I used 40% density at 65degree overhang)

Category: 3D Printer Parts

Tagi