Thermaltake Core V21 LED Sign mod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a small project I did for my Thermaltake Core V21 PC case named "Valhalla" I wanted a custom look and the fan…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 674
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
This is a small project I did for my Thermaltake Core V21 PC case named "Valhalla"
I wanted a custom look and the fan brackets on that case gave me an idea.
I used Phanteks LED Strips Starter Combo Kit with magnets on the brackets.
The plexiglass is 3mm and measured roughly 13cm X 23 cm (might be off as I used scoring to break it so its not that accurate). The plexiglass is etched with Dremel by hand using a template on other side.
The printed part has melted threaded inserts (M3x4x5). Used soldering iron to insert them.
I also bought custom annodized blue screws from Aliexpress (M3x6mm).
PS! The brackets are painted in PlastiDip White and Metalizer Blue.
The brackets are multicolor to match my color scheme but you can print them in single color aswell (just merge the parts togheter)
Any comments are welcome :)
Print Settings
Printer Brand:
Prusa
Printer:
MMU2s
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
15%
Filament:
Prusa PLA
Notes:
Used stock settings in Slic3r. Lowered the PLA temperature a bit to fix stringing.
Threaded inserts
The printed part has melted threaded inserts (M3x4x5). Used soldering iron to insert them.
Category: 3D Printing