Voronoi Lamp Base (battery powered LED)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I remixed a base for the Voronoi lamp (https://www.thingiverse.com/thing:584714) that I printed in FormFutura…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 332
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
I remixed a base for the Voronoi lamp (https://www.thingiverse.com/thing:584714) that I printed in FormFutura GlowInTheDark green filament.
The base is printed in Fillamentum Vertigo filament on my Prusa MK3.
I wanted to give it a inside light so it glows after you turn it off :)
I added a battery holder (https://www.thingiverse.com/thing:178806) to make it portable and added a switch.
Also included are Fusion 360 source files (still learning so not very proffessional quality).
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3 MMU 2
Rafts:
Yes
Supports:
No
Resolution:
0.2
Infill:
10%
Notes:
Raft is needed if your buildplate has poor adhesion. You can try without raft first.
Post-Printing
Used a LVR08 12V battery and soldered some wires to the switch and a 12V LED strip. Added tape to diffuse the LED's as mine were too bright.
Any random LED strip will do.
Base is removable (LED not glued to lamp) and battery is replaceble.
Underside
Light off.
Light on.
Category: 3D Printing