Sonoff Door n Window Sensor SNZB-04 holder - parametric height
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sonoff Door n Window Sensor SNZB-04 holder with parametric height setting. It equals the door rebate.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 78
- Wydruki
- 0
- Wyświetlenia
- 807
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
The Sonoff SNZB-04 Door & Window Sensor is designed for blunt (is this correct? correct me in comments please) doors and windows. But most European doors have a rebate, which causes the sensor to fail. Hence, there was the need for a socket to elevate the sensor from the door frame to the door leaf level.
The design is done in Fusion 360 and is parametric. In the Design Workspace open Modify → Fx Change Parameters and change the *holder_height* parameter. Use the measurement tool (shortcut i) if you are not sure it has the right height for your door leaf.
Designed to use as little filament as possible.
I printed it in PLA with 15% gyroid infill.