trackball tilt base
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed a stand that can change the inclination of the trackball mouse.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 348
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
I designed a stand that can change the inclination of the trackball mouse.
Print Settings
Printer:
Geeetech i3 Pro B
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
25%
Filament:
Other PLA
transpearent
Notes:
By moving the USB dongle's size stopper, it can be used for various trackballs.
If there is a USB dongle hole on the back of the trackball mouse, you can fix it by inserting a moving stopper.
If there is no USB dongle hole on the back of the trackball mouse, you can support the mouse by moving the moving stopper down.
I hope it helps you
You will need the following parts to build this model:
1 M3x5mm screw;
2 M3 washers;
1 M5x20mm Hex Bolt;
1 M5 nuts;
4 anti-slip rubber;
Ex.https://www.amazon.com/dp/B0826J6WCL/ref=sspa_dk_detail_4?ie=UTF8&pd_rd_i=B0826J6WCLp13NParams&s=kitchen&sp_csd=d2lkZ2V0TmFtZT1zcF9kZXRhaWwy&th=1
Category: Office