Elegoo Neptune 3 Creality PSU bracket adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
for using the PSU bracket from the Ender 3 dual Z kit on your Neptune 3
- Ocena
- 5 / 5
- Polubienia
- 21
- Pobrania
- 172
- Wydruki
- 4
- Wyświetlenia
- 1297
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This part allows you to mount the included bracket from the Ender 3 Dual Z axis kit on your Elegoo Neptune printer (or similar)
On the PSU mount, you'll need M4 x 8mm button head screws and the T nuts that come with the creality kit (you can use the shorter 6mm ones that come with the kit, but 8mm holds better) - https://amzn.to/3UH03kJ
The top holes are designed to use the M3 button heads that come with the kit. You may have to open them slightly with a 3.2mm drill.
Don't forget the T nuts :)
If you plan on using the support bearings that come with the Dual Z kit, I have adapters for those here: Elegoo Neptune 3 Creality Dual Z axis support bearing mounting blocks by Feral Engineer | Download free STL model | Printables.com
I designed all of these parts myself, so please, tip your designer :)