Brow cover for face shields. 3 & 4 hole template.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
We made this template to fit most designs that are based on the RC2 or RC3 design.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 406
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
We made this template to fit most designs that are based on the RC2 or RC3 design.
Tools and material used:
-polyester film 0.003" or 0.07mm
-scissors or paper cutter
-hole punch
-(double sided) tape
-(optional) printer or plotter. Template can be printed directly on some materials.
Print instructions
Cut out rectangle.
Punch holes to your shields pin spacing.
If your double-sided tape has a release liner, apply the tape now to marks on template.
Cut slits and round over corners.
[covers can be shipped flat at this stage if desired]
Remove tape release liner, or apply liner free tape now.
Fold outside corners in and under center section.
Match corners to lines on template and press to secure.