CenterGaugeRev2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Per discussion at original page, I inverted the ruling lines so the gauge is now a single piece that can be printed…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 51
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Per discussion at original page, I inverted the ruling lines so the gauge is now a single piece that can be printed without overhang problems.
Update: I added a lower-poly version which should produce a part of almost the same surface quality.
Update 5 May 2022: per reports from makers (see comments), I used Meshmixer to "true-up" the diagonal edge so that it properly crosses the center of a circular object. Use Rev3 now.
Print Settings
Printer:
anycubic vypger
Rafts:
Doesn't Matter
Supports:
No
How I Designed This
Took the original gauge part into Meshmixer, made a solid copy and did a "boolean difference" with a rectangular solid to get the inverted scale lines. Combined the new part with the original, then merged with the second gaugeRev1.5 part.
Category: Hand Tools