Wedding Hoop Centerpiece and Table Number
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model was created for a friend's wedding who wanted a more affordable floral hoop wedding centerpiece.
- Ocena
- 5 / 5
- Polubienia
- 134
- Pobrania
- 493
- Wydruki
- 1
- Wyświetlenia
- 4738
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial
This wedding floral hoop centerpiece and table number is a multipurpose print to save money on your special day!
The model's dimensions are split into three different pieces:
- The hoop
- The base
- The number (numbers are being uploaded progressively)
Printed with 15% infill, supports on.
Assembly
The assembly was made to be done without the use of glue, but mileage may vary depending on the tolerances of your printer. Be sure to test the fit of one number with a hoop and a base before printing the rest and adjust scaling accordingly!
Steps without lights
- Insert the number's stick into the hole in the hoop.
- Combine the number + hoop with the base by inserting the bottom part of the number stick (which is now sticking out of the hoop) into the base.
Steps with lights
- Thread the lights through the hole in the base keeping the battery pack/switch concealed under the base.
- Thread the lights through the hole in the hoop.
- Complete steps 1 and 2 from “Steps without lights.”
- (Optional) You can remove the number now that the hoop hole is aligned with the base hole.
- Wrap the lights around the hoop.
- (Optional) Place the number back into the assembly.
You can now optionally add flowers as a finishing touch.
Update
2023/08/19 Updated twelve.stl to fit in hoop. Added thirteen and fourteen.