20x20x20mm Test Cube
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple test cube. The lettering is exactly centered and 1.2mm wide, the small corners are 0.4mm and the large ones…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 180
- Wydruki
- 1
- Wyświetlenia
- 407
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution
A simple test cube. The lettering is exactly centered and 1.2mm wide, the small corners are 0.4mm and the large ones 1.2mm. Indention is 0.4mm (1 nozzle/4 0.1mm layers).
Hollow version with 1.2mm walls also available, turning the Z-top also into a bridging test.
An Easy version with a 0.2mm phase in the lettering and a very easy version with a 0.4mm phase in the lettering also available.
August2020 Update:
A resin version was added. Since I had lost the original files, I had to re-design it, but took the same measurements. 1.2 mm lettering of 0.6 mm depth, 1.2 mm, walls, and a pair of resin-escape holes in the Z-cover, and a little air intake hole on the X sides to prevent cupping.
Category: 3D Printing Tests