Spool Holder IC3D 10KG Filament Spool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Provides smooth movement and horizontal guide bearings to keep the nubs on the spool from interfering with movement.
- Ocena
- 0 / 5
- Polubienia
- 23
- Pobrania
- 99
- Wydruki
- 0
- Wyświetlenia
- 1087
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
This is a custom designed spool holder for the IC3D 10KG Filament Spools.
I has issues using other spool holders due to the size, weight, narrow spindle opening, and nubs left on the spool (possibly from injection molding it).
This is designed to use 608 bearings, 15 per side for a total of 30 bearings.
I used 8mm Washers to separate the bearings. Nylon washers would probably be thinner and work better.
The holes in the bearing shafts are 4mm. A coarse thread m4 screw works well to connect them.