Anycubic Kobra Filament Guide - Snap On - Parametric
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Filament guide for the Kobra that snaps onto the top rail from underneath.
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 184
- Wydruki
- 3
- Wyświetlenia
- 796
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Filament guide for the Kobra that snaps onto the top rail by sliding it on from underneath. It was designed to fit the main center section of the top rail but I've also included a freecad project file where it's fully parameterized so you can adjust to your needs.
In the freecad file, all parameters are in the spreadsheet labeled “dim” so just edit the values to your liking. ***If you change the values, you likely will break the fillets so you may have to re-do them (it's easy though). They're the last 2 features in the project so if you don't care for fillets just delete them.***
Print recommendations:
- Make sure to print with the flat bottom side down on the bed
- 100% infill for longevity, less for print speed
- no supports necessary