Webcam Mount for Original Prusa Enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Quick and dirty remix of Reismann's Pi Camera mount for webcams
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 129
- Wydruki
- 6
- Wyświetlenia
- 805
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Quick and dirty remix of Reismann's Pi Camera mount. I don't really know how to use tinkercad but I made this to use with my webcam.
Parts:
1x M3x12 bolt from spare parts
1x M3 nut from spare parts
1x D-ring camera mounting bolt
Instructions:
Pre-tighten the bolt and nut to get the nut to stay in the seat then mount to whichever mounting point in the enclosure.
Place the webcam on the ledge and screw in the camera mounting bolt.
Known Issues:
I realize it has a lot of open edges and needs to be repaired but I don't really know how to do that. I just added shapes to the original .stl in tinkercad. I would recommend not using PLA as the heat in the enclosure plus the weight of the camera will likely cause it to sag.