1 / 2
SLS Block 1 (Multi Parts) 1:200 with NASA Worm Logo — zdjęcie 1
1 / 2

SLS Block 1 (Multi Parts) 1:200 with NASA Worm Logo

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I modified the SRBs to incorporate the NASA worm logo if you have a MMU or similar.

Ocena
0 / 5
Polubienia
63
Pobrania
215
Wydruki
0
Wyświetlenia
2720
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

The 3 included files take the place of the original model files SRB_Mid_L_White_x1 & SRB_Mid_R_White_x1. I split the middle part in half, so that the MMU print took a little less time. The srb_mid_l_r_white_x1_WormLogo.3mf file is the MMU file, the other 2 can simply be printed white.

You'll also need an additional 2 pieces of the SRB_Jonction_White_x5 part to combine the 2 new left and right pieces together. You can also print 2 less of the SRB_Ring_Black_x16 pieces as I incorporated those into the MMU print.

I printed the entire model at 200% scale, but the included files match the original model's scale. They should print fine at that scale, but I did not test it.

Tagi