Modern 4 legged plant pot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lately I have been challenging myself to try and replicate what seem like complicated shapes to me using the…
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 47
- Wydruki
- 1
- Wyświetlenia
- 277
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
Lately I have been challenging myself to try and replicate what seem like complicated shapes to me using the simplistic tools in TinkerCad. After seeing 3DDIY's design on here and youtube, I tried to design my own version of his modern flower pot with dowel legs. I designed mine with 4 legs as it was easier for me to achieve an equal spread of the legs in tinkercad. This pot was designed for use with 21mm dowels in the cutouts. The cutouts came out a little smaller in the final print so the file may need scaling up ever so slightly in your slicer of choice, or you may need to sand the dowels down. Alternatively you can print 4 of the leg file provided. Both were printed with 15% infill, 3 perimeter walls and tree support used on the pot section. The pot is approx 10cm in diameter but both pot and legs could be scaled up to give a bigger item.
Thanks to 3DDIY for the inspiration. His original design can be found here: https://www.thingiverse.com/thing:4556584
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
200
Infill:
15
Filament: various PLA Marble for the pot, green for the legs
Category: Decor