Skadis folding rule holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holder for a standard german folding rule (total length: 2 meters). Compatible with Ikeas Skadis board.
- Ocena
- 4,931 / 5
- Polubienia
- 123
- Pobrania
- 836
- Wydruki
- 37
- Wyświetlenia
- 1981
- Oceny
- 29
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
Completely recreated, but with a flat front. Better for printing with less supports.
originally designed for my folding rule with following dimensions:
- width 36 mm
- depth 16.5 mm
for this I used the file with following inner space dimensions:
- width 36.5 mm
- depth 17 mm
My print parameters: Prusa Mini, PrusaSlicer: model orientation is standing upright with support, 15% infill, 0.20mm layer, 0.4mm nozzle, PLA orange
Pegs are designed with a width of 4.9mm for a rather tight fit.
Available sizes
i added some additional size variations. it seems at least in Germany there is no decent standard for the dimensions, so i used some sizing steps.
Dimensions in the file name describe the inner space width and depth, so choose your best fit.