Faux Fox Keyboard (FFKB) Gasket Mount Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A gasket mount case for the FFKB. Only 6 col, wired MX builds are supported in this case design.
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 91
- Wydruki
- 1
- Wyświetlenia
- 1345
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a gasket mount case design for the FFKB. All versions should fit. This model is untested as I haven't had time to print it, but it is the same dimensions as my FFKB sandwich design, so it should all fit just fine. But print at your own risk.
The case requires 3mm neoprene or similar foam strips to use as gaskets. It also uses 6mm x 3mm round neodymium magnets to fasten all parts together.
The trackball cover fastens by either a friction fit or there are small holes for fitting 3mm x 2mm round neodymium magnets to secure the trackball cover. It should stay pretty well without the magnets, but your experience may vary. All printers are different.
The mid pieces I've modeled include options for Cirque trackpad, 35mm trackball, EC11 encoder, and no frills.
Also, the lid pieces I've modeled only accept EC11 encoders at this time. I'll add another for EVQ encoders once I have the time. The switch plates are already set up to accept either type of encoder (EC11 or EVQ) so I just need to modify the lid pieces for the EVQ a bit to accommodate.
Foam: https://www.amazon.com/Neoprene-Adhesive-Padding-Multi-Function-Soundproof/dp/B08RB2FWVR/?th=1
6mm x 3mm Magnets: https://www.amazon.com/DIYMAG-6x3mm-Refrigerator-Premium-Brushed/dp/B07KZQGWNN
3mm x 2mm Magnets: https://www.amazon.com/200Pcs-Magnets-Miniatures-Refrigerator-Whiteboard/dp/B09NRH97D9/ref=sr_1_6?keywords=3mm+magnets&qid=1648967669&sr=8-6